The Vorza started life as a competition vehicle designed to be approachable, tunable and most of all FUN!! And that's where we've taken Vorza for 2022. Fully tunable, highly capable and HPI TOUGH!

Under the body, each new Vorza buggy has a ton of great durability and tuning features that make each one a joy to drive with a clear upgrade path to the "S" spec and beyond! The Vorza takes the race-winning design and mixes it up with HPI FLUX tech to give you awe-inspiring speed! This is a ready to run (RTR) buggy that you can take to BMX jumps for hair-raising big-air thrills, and then you can take it straight to any track for top-level racing action - it will turn heads and amaze your friends!

The RTR Vorza FLUX chassis features a wide range of excellent features, esteemed performance heritage, amazingly powerful motor and speed controller combination, complete adjustability in the suspension and a tunable drivetrain, if you want to experiment to tune your Vorza FLUX to your liking.

Features:
Factory-assembled & pre-painted 4WD 1/8 scale Car
Pre-painted body with awesome speed graphics
Pre-mounted all-terrain tires
High torque metal geared steering Servo
6S LiPo Capable
MLH-2200 2200KV brushless motor with 5mm shaft
Waterproof 150A ELH-6S speed controller
LiPo ready adjustable battery tray with secure hook-and-loop straps
Aluminum heatsink motor mount help the motor stay cool with optional fan mounting points
Full-time 4WD for excellent control
Efficient and tough shaft drivetrain with front universals
Threaded 16mm Big Bore oil-filled shocks for confident control
4mm Aluminum shock towers front and rear
4mm aluminium chassis
Super thick High-Impact nylon links
Front and rear sway bars for excellent handling
Total adjustability: roll centre, wheelbase, camber, sway bar and more
Hardened steel spur and pinion gear for extreme durability
Spiral-cut bevel gears for the best balance of strength and efficiency
Tough oil-filled 4-gear differentials
Suspension based on World Championship pedigree
Super low CoG for superior handling
Nylon stone and dirt guards keep rocks out of the chassis
HD High-Impact composite suspension blocks front and rear
Dual bellcrank steering
Cam type servo saver
All hex head hardware
Full set of rubber-sealed ball bearings
2.4GHz Radio Set with waterproof receiver
Enclosed receiver box

WHAT YOU NEED:
2 matching Battery Packs with T-Plugs - HPI Plazma Li-Po batteries recommended!
Battery Charger, HPI Recommends:
Reactor 600 - #160236 (US), #160237 (UK), #160238 (EU), #160239 (AUS)

Note: the battery packs required for the Vorza FLUX are two identical high-quality LiPo batteries with at least 4000mAh capacity and 40C discharge rate. A Single 4S or 6S Pack could be used with a bridging adaptor.
4 AA Batteries for Transmitter #101939

Specifications:

Length: 508mm; Width: 205mm; Height: 178mm; Wheelbase: 325mm

Drivetrain: Shaft 4WD

ESC ELH-6S: Input Voltage: 3-6S LiPo; Continuous Current: 150A; Motor Limit: 4S LiPo <3000kV, 6S <2400kV; 6V/3A Switching BEC; T-Plug

Motor FLUX MLH-2200: 2200kV; 6.5mm Bullet Connector; 12 Gauge Wire; 5mm Motor Shaft

2.4Ghz FHSS TF-50 Transmitter: Servo Reverse; EPA; Trims and Dual Rate switches.

Required to Complete: 4-6s LiPo (single or parallel), Charger, 4 AA Batteries; Note: the battery packs required for the Vorza FLUX are two identical high-quality LiPo batteries with at least 4000mAh capacity and 40C discharge rate. A Single 4S or 6S Pack could be used with a bridging adaptor.